Qicai Bangyuan

Qicai Bangyuan teaches you the construction procedures and precautions for rubber powder–polystyrene bead insulation systems.

Release time:

2023-05-22 17:04

Many friends are not very familiar with the construction procedures and precautions for rubber‑powder polystyrene bead insulation systems. In this issue, Qicai Bangyuan Building Materials will share the relevant details with you, hoping it will be of some help.

 

1. The rubber‑powder and expanded polystyrene particle insulation mortar consists of rubber powder and expanded polystyrene particles, packaged separately in bags. When used, it is mixed with water according to the specified ratio (rubber powder to water = 1:2). This material should be mixed as needed and used up within 4 hours.

Rubber powder polystyrene granules

II. The wall surface shall be thoroughly cleaned, free of oil stains, loose debris, and other contaminants. Any loose or weathered portions of the existing wall must be completely removed, and any surface irregularities exceeding 10 mm in height shall be leveled.

 

3. Concrete walls and masonry walls shall be fully coated with interface mortar.

 

4. The thickness of each layer of the thermal insulation plaster shall not exceed 10 mm; subsequent layers shall be no more than 20 mm thick, with an interval of at least 24 hours between applications.

 

5. When applying tile cladding over a polystyrene bead insulation layer, use metal mesh instead of fiberglass mesh as the reinforcing framework for the crack-resistant protective layer, and securely anchor the metal mesh to the structural wall.

 

6. The crack-resistant insulation layer may be installed only after the insulation layer has cured and dried.

 

7. Apply the crack-resistant mortar to a thickness of approximately 3–5 mm. After spreading it over a specified width, immediately press the mesh fabric into the mortar using a steel trowel. The overlap between adjacent mesh strips shall be no less than 50 mm: first press one side into the mortar, then apply additional crack-resistant mortar before pressing the other side; dry lapping is strictly prohibited. The mesh fabric must be laid evenly, without wrinkles, and fully covered with mortar to ensure 100% coverage.

 

8. Before drying, the insulation layer and the crack-resistant protective layer shall be protected from water impact, mechanical impact, and vibration.

 

9. The thickness of the protective layer and the construction details shall comply with the requirements for energy-efficient building design, and the insulation layer thickness shall be uniform, with no negative deviation allowed.

 

 

 

1. During on-site application, the rubber powder–polystyrene bead insulation mortar requires no added admixtures; the water-to-solid ratio and plastering time must be strictly controlled.

2. During transportation, precautions should be taken to protect the product from moisture, rain, and direct sunlight.

3. Store in a well-ventilated, dry place, avoiding moisture and direct sunlight.

4. Upon delivery to the construction site, ensure protection from water and moisture; the storage period should not exceed 3 months, and during humid seasons, it should not exceed 15 days.

5. Once installation is complete, the finished surface should be protected from impacts and water exposure; during winter construction, take precautions against freezing.

6. After each application, promptly clean all tools and mixing equipment to ensure they remain in good working condition for the next use.

 

Precautions for Applying Rubber Powder–Polystyrene Granule Insulation System

 

1. During on-site application, the rubber powder–polystyrene bead insulation mortar requires no added admixtures; the water-to-solid ratio and plastering time must be strictly controlled.

 

2. During transportation, precautions should be taken to protect the product from moisture, rain, and direct sunlight.

 

3. Store in a well-ventilated, dry place, avoiding moisture and direct sunlight.

 

4. Upon delivery to the construction site, ensure protection from water and moisture; the storage period should not exceed 3 months, and during humid seasons, it should not exceed 15 days.

 

5. Once installation is complete, the finished surface should be protected from impacts and water exposure; during winter construction, take precautions against freezing.

 

6. After each application, promptly clean all tools and mixing equipment to ensure they remain in good working condition for the next use.

 

Shandong Bangyuan New Building Materials Co., Ltd. is located at No. 17 Kunming Road, Linyi Economic Development Zone. It is a comprehensive enterprise integrating research, development, production, and sales of building materials. The company operates modern production facilities across China and maintains numerous stable partnerships with construction projects. Leveraging state-of-the-art manufacturing equipment and a dedicated R&D team, the company continuously develops a wide range of high‑quality, environmentally friendly new building materials.

 

Shandong Bangyuan Building Materials Co., Ltd. primarily offers a range of innovative building materials, including molded polystyrene boards, graphite‑enhanced polystyrene boards, lost‑foam molds, polymer‑based bonding mortars, polymer‑modified finishing mortars, adhesive‑powder particle slurries, lightweight machine‑sprayed plaster gypsum, and alkali‑resistant mesh fabrics. Shandong Bangyuan Decoration Engineering Co., Ltd. is a specialized engineering firm focused on the research, development, and installation of various exterior wall insulation systems.

News

Warm congratulations to Shandong Bangyuan New Building Materials Co., Ltd. on its appearance on the CCTV Agriculture and Rural Affairs channel.

Ni Hongju, Chairman of Bangyuan Group, was featured in a profile interview on the former CCTV Middle School Channel’s program “Building a Strong Nation.”

Shandong Province Technical Announcement on the Promotion and Application of Construction Science and Technology (2024)

Construction Procedures and Precautions for Rubber Powder–Polystyrene Granule Systems

1. The rubber powder–polystyrene bead insulation mortar consists of rubber powder and polystyrene beads, which are packaged separately in bags. When used, the two components are mixed with water according to a specified ratio (rubber powder to water: 1:2). This material should be mixed as needed and applied within 4 hours.

Characteristics and Key Construction Points of Polymer-Bonded Mortar

Many customers do not fully understand the characteristics and key construction considerations of polymer‑bonded mortar. In this issue, a polymer‑bonded mortar manufacturer from Shandong will share with you the distinctive features of our products.

What are the main properties of graphite polystyrene boards?

Graphite‑polystyrene insulation boards, EPS polystyrene boards, and mechanically bonded rock wool mortar composite panels. The hydrophobic rock wool board serves as the thermal insulation layer, which is anchored to the base wall using a combined adhesive‑and‑mechanical fastening system. It comprises a finishing coat made of skim coat mortar and fiberglass mesh reinforcement, topped with either a decorative mortar finish or a paint coating, forming an A‑class non‑combustible building energy‑saving insulation system.